It seems that whenever I resume the laptop out of sleep (or undock) for some reason even Google can't explain my keyboard repeat rate and delay slow down. If I go into Control Panel and check everything is still set the way I like it -- and if I OK out, then everything is fine again?!?! I can go through this Control Panel process every time, but this sort of annoying crap ruins my day. I can't find a way to fix it, so Plan B is to write a program to do the process for me automatically.
(Update: see version 2 below for a slightly different fix)
Tame the Keyboard Service
I decided to write a service because: this is a long running program, it needs to start automatically, and I haven't written a service in VS2010 yet. (It turns out the need to interact with the desktop probably would have made a forms project easier, like something with a tray-icon).
Creating a Service in VS2010
You start the usual way by selecting a service template to make a new project and solution. I haven't made a service in a while, and I usually do all the setup and install manually so the next step did not seem familiar: Using the designer, you right-click inside to get a menu with "Add Installer". This simple service is going to have three parts (but they are easy to create with VS2010): 1. The service, 2. an installer that adds the service to "Services" and 3. a Setup program that will "Install" by deploying and running the installer.
Fig 1. Add Installer
Note: before you go too far, change the names of everything (classes, titles, other text) to something better that Service1 for example. It will be harder to change later. In the Designer, you can also modify the service properties, e.g., CanHandlePowerEvents=True, ServiceName="TameKeyboardService".
A service process can have more than one service so you end up with two new components (see Fig 2). Again, using the Designer, select each to set the desired properties. For me, this Process needs to use LocalSystem account, and the Service needs StartType=Automatic, for example. This is also where you set the DisplayName and Description that will show up in Services.
Fig 2. Configure Installer 
Writing the Service
The VS2010 template gives you OnStart() and OnStop() overrides. In OnStart, I'm going to get the current repeat and delay rate. To do this I need to P/Invoke a Win32 function (not strictly true, there is a managed function, but it is read-only).
''' normally set from the Desktop by using the Control Panel
''' </summary>
''' <param name="uAction">system parameter to query or set</param>
''' <param name="uparam">depends on system parameter</param>
''' <param name="lpvParam">depends on system parameter</param>
''' <param name="fuWinIni">WIN.INI update flag</param>
''' <returns></returns>
''' <remarks></remarks>
<DllImport("user32", CharSet:=CharSet.Auto)> _
Shared Function SystemParametersInfo(
ByVal uAction As Integer,
ByVal uparam As Integer,
ByRef lpvParam As Integer,
ByVal fuWinIni As Integer) As Integer
End Function
Get like this:
SystemParametersInfo(SPI_GETKEYBOARDDELAY, 0, Me.repeatDelay, 0)
SystemParametersInfo(SPI_GETKEYBOARDSPEED, 0, Me.repeatRate, 0)
End Sub
ServiceBase also provides OnPowerEvent() to override:
If powerStatus = ServiceProcess.PowerBroadcastStatus.PowerStatusChange OrElse
powerStatus = ServiceProcess.PowerBroadcastStatus.ResumeSuspend Then
ApplyKeyboardSettings()
End If
Return MyBase.OnPowerEvent(powerStatus)
End Function
(Another option, here or in WinForms, is to use AddHandler Microsoft.Win32.SystemEvents.PowerModeChanged, AddressOf PowerEventHandler -- This works for coming out of suspend, not sure about undock, though.)
When the laptop comes out of suspend, or undocked (or unplugged, plugged , etc -- maybe too many things when on power but I don't know how to just filter this to docking and sleep events) I re-apply the desired settings:
SystemParametersInfo(SPI_SETKEYBOARDDELAY, Me.repeatDelay, notUsed, 0)
SystemParametersInfo(SPI_SETKEYBOARDSPEED, Me.repeatRate, notUsed, 0)
End Sub
Allow Service to Interact with Desktop
Normally, this would be enough, but it turns out SPI_SET.... doesn't work unless the service can "interact with desktop". There inexplicably seems to be no way to configure your service to install with this option (!?!?) You can do it manually:
Googling found two solutions, one using the registry and another using WMI -- the WMI method seemed less of a hack:
''' </summary>
''' <remarks>Other alternative appear to be manually, or through registry</remarks>
Public Shared Sub DesktopPermissions()
Try
Dim controller As New ServiceController("TameKeyBoardService")
Dim options As New ConnectionOptions
options.Impersonation = ImpersonationLevel.Impersonate
' CIMV2 is a namespace that contains all of the core OS and hardware classes.
' CIM (Common Information Model) which is an industry standard for describing
' data about applications and devices so that administrators and software
' management programs can control applications and devices on different
' platforms in the same way, ensuring interoperability across a network.
Dim mgmtScope As New ManagementScope("root\CIMV2", options)
Dim wmiService As New ManagementObject("Win32_Service.Name='" & "TameKeyBoardService" & "'")
Dim inParam As ManagementBaseObject = wmiService.GetMethodParameters("Change")
inParam("DesktopInteract") = True
Dim outParam As ManagementBaseObject = wmiService.InvokeMethod("Change", inParam, Nothing)
controller.Start() '-- e.g., if called from ProjectInstaller_AfterInstall()
Catch ex As Exception
End Try
End Sub
This has to be done before the service starts, so I call it right after the service is installed:
Private Sub ProjectInstaller_AfterInstall(sender As Object, e As System.Configuration.Install.InstallEventArgs) Handles Me.AfterInstall
TameKeyboardService.DesktopPermissions()
End Sub
End Class
That pretty much covers the service, next create a setup program to install it....
Setup Project
Add a new project to the solution using the Setup project template. Right-click on the setup project and "Add New Project Output...". Pick Primary Output and the service project (they are probably already selected), hit OK. Then, you need a Custom Action to install your service (I'll just paste this from the MSDN walkthrough):
To add a custom action to the setup project
-
In Solution Explorer, right-click the setup project, point to View, and then click Custom Actions.
The Custom Actions editor appears.
-
In the Custom Actions editor, right-click the Custom Actions node and click Add Custom Action.
The Select Item in Project dialog box appears.
-
Double-click the Application Folder in the list to open it, select Primary Output from TameKeyboard (Active), and click OK.
The primary output is added to all four nodes of the custom actions — Install, Commit, Rollback, and Uninstall.
-
In Solution Explorer, right-click the Setup1 project and click Build.
To install the Windows Service
-
To install TameKeyboardService.exe, right-click the setup project in Solution Explorer and select Install.
-
Follow the steps in the Setup Wizard. Build and save your solution.
Source Code, Setup.msi
Still looking for the right place for source, exe, msi, and zips; currently you can find this project on my SkyDrive: (the setup msi will expect .Net 4.0, forgot to target it lower)
It has a lot of qualities of a made-for-personal-use quick one-off, but I learned some interesting things getting it to work.
Version 2
The original tried to track your preference and continuously maintain those settings even if Dell changed them. Sometimes that might not be enough, e.g., if Dell manages to change them before the service starts tracking. In this case, try this one, it always sets the delay to 0 -- that works for me and anyone else who is happy with no delay.
UPDATE: Keyboard Fix 2
